LP1070-25.5 | LP1070 Short-Wave Infrared Longpass FilterThe MidOpt LP1070 25. 5 is a 0. 7mm thick silicon longpass filter with antireflection coatings on both sides, optimized for 1100 2300nm transmission. Because silicon is inherently opaque, blocking in the visible and very near IR spectrums is excellent, and the positioning of the cut on slope is completely insensitive to the angle of incidence of light impinging on the surfaces. LP1070 also reduces Nd: YAG (1064nm) light transmission by approximately

Specifications + Useful Range Min 405 nm Useful Range Max 645 nm Secondary Useful Range Min 725 nm Secondary Useful Range Max 755 nm FWHM 25050 nm Adhesive Backed Yes Tolerance 20 % Peak Transmission ≤ 90 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Clear Glass Filter Diameter M22

Advanced Illumination LL137D-3085024 Downloads:

Specifications + Useful Range Min 460 nm Useful Range Max 490 nm Secondary Useful Range Min 830 nm Secondary Useful Range Max 870 nm FWHM 4560 nm Adhesive Backed Yes Tolerance 5 % Peak Transmission ≤ 90 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Clear Glass Filter Diameter M37

The GO-5100C-USB is a compact industrial area scan camera delivering an excellent blend of size

Compactly designed to allow use in small spaces

The MidOpt LP1070-37

such as the 5PM12-5

or the TSLOT channels on the Left

95 mm Rear Principle Point 9

This lens is designed for producing images on sensors up to 1

1× Image Circle Diameter 8 mm Image Size Dimensions Not Specified Imager Format 1/2″ Distortion Typical (%) < 0

•No driver/controller required